Glass and pipe cleaning video and instruction

Mile High Cleaner How-To’s

Clean any stickiness from any surface or piece, growing to extracts and all puffing in between using our tools.

For best results we recommend the Deluxe Cleaning kit

Everything you need to clean your piece 50 times
loads of brushes, Canna Mag scrubber
and lifetime replacement of all the tools in the kit.
This is our best deal

Glass and pipe cleaning video General instructions

Before cleaning Prepare your piece.

Prepare the piece.

Fill Water Pipe or submerge pipe in HOT water and let sit for a minute.

Like soaking a pan to get the resin gooey.

DRAIN the piece completely but retain the warmth.

Do this for any piece. Warm, gooey resin is easier to clean than cold dry resin.

Clean any type of paraphernalia

Loading
How to clean water pipe
Info and techniques for water based paraphernalia
Click Here
How to clean Dry Pipes
Easiest way to clean a VERY dirty pipe is boiling
Click Here
Previous
Next

Mile High Cleaner How-To’s!

Starting with Water Paraphernalia

To Clean almost any piece effectively you must use tools. Like doing dishes with brushes and scrubbers
Squirt in some formula and coat the resin using tools.
Scrub any spots.
Add dish detergent and scrub again.
Rinse in hot water.

Mile High Cleaner How-To’s!

Dry pipes, one-hitters to Spoons

100 stains on a TEE shirt

Remove stains from Denim to Satin

Sometimes you get resin or Dabs on your clothes. Theses Nasty Nuggets can ruin your fine garments, even if its just a favorite Tshirt.
DAB Drops takes stains from most fabric, denim to silk. Works on resin stains as well.
Unique 2-part formula Dissolves And Breaks-up those tough stains.
Clean 25 stains with one kit but pays for itself with one use

Ready for the next level?

Prevent resin from sticking!
Just add a squirt of MHC to the water and smoke as much as you want.
The next day (or next session) rinse piece well in hot water for the easiest clean ever!

Our Organic, odorless, plant-based formula is completely edible. It does not change the hit because it is odorless and inert.
Put in 1 drop per inch of height of the piece; a 24″ Rig gets 24 drops. a 12″ Flask gets 12 drops, a 6″ Bubbler gets 6 drops. Add a little more if there is a lot of water, use a little less if there is less water in the piece

Repeat daily or every session and rinse your piece clean every time. Use on complex pieces and see how effective hot water rinsing can be using

Mile HIGH Cleaner to prevent resin from sticking.

Find More Helpful Tips on our YouTube Channel

Looking For Discounts?

Sign up for our email list for 20% off your first order and get access to
exclusive email-only special offers and early access

Shopping Cart
AllEscortAllEscortAllEscort